Outside capillary tube diameter: 0.3 - 5mm
(0.3; 0.32; 0.36; 0.4; 0.45; 0.5; 0.55; 0.6; 0.7; 0.8; 0.9;
1.0; 1.2; 1.4; 1.5; 1.6; 1.8; 2; 2.2; 2.4; 2.5; 2.8; 3; 3.2;
3.4; 3.5; 3.6; 3.8; 4; 4.2; 4.5; 4.8; 5)
Capillary tube wall thickness: 0.1 – 1.6mm
(0.1; 0.12; 0.15; 0.16; 0.18; 0.2; 0.22; 0.25; 0.28; 0.3;
0.32; 0.35; 0.36; 0.38; 0.4; 0.45; 0.5; 0.55; 0.6; 0.7; 0.8;
0.9; 1; 1.1; 1.2; 1.3; 1.4; 1.5; 1.6)
Tolerance Limits:
diameter:
D0.3 - 1mm:
Ordinary precision ± 0,03 mm;
Improved precision ± 0,02 mm;
D1.2 - 2mm:
Ordinary precision ± 0.04mm;
Improved precision ± 0.002mm;
D2.2 - 5 mm:
Ordinary precision ± 0.05%;
Improved precision ± 0.03%;
wall:
S 0.1 – 0.2mm:
Ordinary precision + 0.03 – 0.02mm;
Improved precision + 0.02 – 0.01mm
S 0.22-0.5mm:
Ordinary precision ± 0.04mm;
Improved precision ± 0.03mm
S 0.55 – 1.6mm:
Ordinary precision ± 10%;
Improved precision ± 8%
Notes:
1. Steel Grades 12Cr18Ni9, 08Cr18Ni10Т, 12Cr18Ni10Ti.
2. Steel chemical analysis shall meet the requirements of
GOST 5632-72.
3. Random and fixed lengths of capillary tubes: 0,3 to 4,0 m.
4. Capillary tube weight is calculated with the use of tube
calculator (set to stainless steel material).
5. Tubes with controlled inside diameter and wall thickness
shall be furnished under additional agreement.
6. At the customer’s request capillary tubes shall be
subject to intergranular corrosion test and pneumatic test
under air pressure not less than 6 bars.
7. Capillary tubes with outside diameter below 1 mm shall be
subject to bent-over test, flattening test and grain size
analysis.
|
Mix |
|
Diameter,
mm |
Wall,
mm |
Diameter,
mm |
Wall,
mm |
Diameter,
mm |
Wall,
mm |
|
0.3;
0.32 |
0.1 |
0.8 |
0.1
- 032 |
2 |
0.1
– 0.9 |
|
0.36;
0.4 |
0.1;
0.12 |
0.9 |
0.1
– 0.36 |
2.2;
2.4 |
0.1
– 1.0 |
|
0.45 |
0.1
– 0.16 |
1 |
01 – 0.45 |
2.5;
2.8 |
0.1
– 1.2 |
|
0.5 |
0.1
– 0.2 |
12 |
0.1
– 0.55 |
3; 3.2 |
0.1
– 1.4 |
|
0.55 |
0.1
– 0.22 |
1.4;
1.5 |
0.1
– 0.6 |
3.4
- 5 |
0.1
– 1.6 |
|
0.6 |
0.1
– 0.25 |
1.6 |
0.1
– 0.7 |
|
|
|
0.7 |
0.1
– 0.28 |
1.8 |
0.1
– 0.8 |
|
|
